DLINK DES-1016D

16 Auto-sensing 10/100Mbps Ports
The switch comes with 16 10/100Mbps ports, allowing a small workgroup to flexibly integrate to Ethernet and Fast Ethernet. These intelligent ports detect the network speed and auto-negotiate between 100BASE-TX and 10BASE-T, as well as between full and half-duplex.

Flow Control for Secure Transmission
All ports support flow control. This function minimizes dropped packets by sending out collision signals when the port’s receiving buffer is full.

Auto-negotiation of MDI/MDIX Cross Over
All ports support auto-negotiation of MDI/MDIX cross over. This eliminates the need for cross over cables or uplink ports. Any port can simply plug to a server, a hub or a switch, using the usual straight-through twisted-pair cable.

Plug-and-Play
With 16 plug-and-play ports, the switch is a perfect choice for workgroups to upgrade performance in a client/server environment. The ports can be connected to servers in full-duplex, or hubs in half-duplex.

Direct Connection to Workstations
With low-cost connection per-port, the switch can be set up for direct connection from the PCs. This relieves data bottleneck by giving each workstation a dedicated bandwidth on the network.

Category:

55,200

Product Description

Standards
– IEEE 802.3 10BASE-T Ethernet
– IEEE 802.3u 100BASE-TX Fast Ethernet
– ANSI/IEEE 802.3 NWay auto-negotiation

Protocol
CSMA/CD

Data Transfer Rates
– Ethernet:
10Mbps (half-duplex)
20Mbps (full-duplex)
– Fast Ethernet:
100Mbps (half-duplex)
200Mbps (full-duplex)

Topology
Star

Network Cables
– 10BASE-T:
UTP Cat. 3, 4, 5 (100 m)
EIA/TIA-568 100-ohm STP (100 m)
– 100BASE-TX:
UTP Cat. 5 (100 m)
EIA/TIA-568B 100-ohm STP (100 m)

Number of Ports
10/100Mbps port x 16

Media Interface Exchange
Auto MDI-II/MDI-X for each port

Twisted-pair Rx Reverse Polarity
Auto-correction for each port

Diagnostic LEDs
Per device:
– Power
Per port:
– Link/Activity
– Full-duplex/Collision
– 100Mbps speed